mo.view race xl mirror
glasless
Important notes
mo.view race xl mirror glasless
motogadget revolutionised the rear-view mirror with its invention of the glassless mo.view mirror range. With these mirrors, the reflective surface is actually machined into the aluminium body using a special diamond-grinding process on ultra-precision machines. This method creates a "weightless" design with no border or frame. The mirror body itself is very slim and lightweight. As exemplified by the motogadget mo.view *race XL* mirror.
mo.view *race XL* mirrors feature very clean lines, and they go perfectly with many other motogadget accessories. They are ultra-flat and free of any distortion.
These mirrors can be installed on the handlebar with any M10 mirror thread (also on Harley-Davidson motorbikes, using the mo.view *screw kit*). Three securing screws with different threads are included. The mirror offers sufficient length with a 150 mm stem, and is suitable for mounting both left and right.
- Material: Anodised aluminium, CNC-machined
- Weight: approx. 175 g
- Width of mirror body: 129 mm
- Height of mirror body: 80 mm
- Thickness of mirror body, excluding ball head: 4.5 mm
- Length of mirror stem: 180 mm
- E-approved
- Dimensions in mm (see dimensional sketch): a = 81, b = 129, c = 250, d = 200
Comprises:
mo.race *race XL* Rear-View Mirror (with ECE marking), 1 screw M10 x 1.5, 1 screw M10 x 1.25 right-hand thread, 1 screw M10 x 1.25 left-hand thread, instructions for use
Manufacturer: Motogadget GmbH | Wollenberger Straße 4 I/J | 13053 Berlin | Deutschland | +49 3069004100 | shop@motogadget.de | www.motogadget.com
High Class Instruments & Accessories - MADE IN GERMANY
Anyone who is serious about customising cannot fail to appreciate the quality of motogadget products. In no time at all, the Berlin-based manufacturer has achieved virtually cult status with its high-class instruments. The reason is the exceptional functionality of motogadget products, but most importantly their extremely clean design, high-quality materials, top engineering and absolute reliability.
Modern vehicle accessories of different types now frequently carry an "E" approval mark valid throughout Europe. This "E" mark, which is made up of a combination of letters and numbers, is clearly displayed on the product and shows the application tested, the country in which testing was carried out and, where appropriate, the vehicle type to which approval applies. EC type approval for exhaust systems, for example, are always issued for a specific vehicle type, whereas in the case of lighting, they apply to an entire group of vehicles, e.g. motorcycles.
This certification mark is the sole proof of legality stipulated by law, i.e. no written report or entry in the vehicle documents by TÜV (German Technical Inspection Association) is required. However, when it comes to installing accessories, the relevant guidelines of the Road Traffic Licensing Regulations (StvZO) must always be observed.
At at a roadside check or a TÜV vehicle inspection, the registered keeper is only required to show the "E" mark. It is then up to the official in charge whether to check the mark with the Federal Motor Transport Authority (KBA) in Flensburg (or equivalent type approval authority in other countries), which is able to decode all certification marks.
Original parts on newer vehicles that have been given an "E" mark at the factory may only be replaced with accessories that have likewise undergone E-approval. An E-certified mirror may not, for example, by replaced with a mirror that only has TÜV approval under the German vehicle licensing regulations.
Dimension sketch mirror
To ensure that your objective and truthful report will be really beneficial to all readers, please observe the following rules.
- Please only rate products that you have personally used for their intended purpose.
- Please give reasons for your positive and negative criticisms. Only then will they benefit other customers and allow us to improve the product if necessary.
- Please don’t copy content that has already been published elsewhere. It’s your personal experience which counts.
- Data protection: Please don’t include your own and other people’s addresses, telephone numbers or URLs or even the names of third parties (people as well as companies) in your review.
- In your product review, please don’t make comparisons with third party product ranges. Regardless of whether you judge these positively or negatively, you, or we as operators of this online shop, would be violating competition law.
Fair play: Please follow these rules so that we don’t have to shorten or delete your rating.
Your product rating has been saved. It will be displayed in a few minutes
Do you really want to cancel your entry?