FASTWAY CITY 1 WP
Important notes
FASTWAY CITY 1 WP
The Fastway *City 1 WP* are motorbike boots for any occasion. They sit well on the foot, are waterproof and breathable, look really great in suede/textile mix and provide the same level of protection and safety as any typical modern short boots. Thanks to the touring soles and anatomically shaped insoles, youβll have a lot of fun in these boots whenever youβre out and about, and also because the *City 1 WP* is also perfect for sightseeing walks.
Material:
- Suede/textile mix
- Waterproof and breathable thanks to Drygate climate membrane
- Textile lining (100% polyester)
- Rubber touring sole
- 3-fold hook-and-loop fastener
- Gear lever reinforcement
- Heel reflectors
- Anatomically designed insole
- Approx. 13 cm (size 44)
- certified in accordance with EN 13634:2017
Your breathable shoes are wind and waterproof. However, boots are only breathable if you're wearing technical socks. Whereas cotton socks absorb moisture, technical socks draw sweat and moisture away from the foot, initially into the shoe. The breathable shoe membrane then transports the moisture completely out of the shoe. Breathability is thus ensured.
Since 1955
Classic in design and suitable for any purpose - motorbike clothing from FASTWAY is just as suited to enduro bikes as it is to touring and naked bikes. Perfect for bikers who like to keep it simple. At FASTWAY, you can expect outstanding value for money and decades of experience.
Sold under various brand names (Gore-Tex, Reissa, Tepor, Sympatex, Hipora, Porell, Helsapor, Enprotex, Nibo, Humax, Drygate etc.). Gore-Tex and Sympatex have patent protection. One thing all these membranes have in common is their basic function: exploiting a temperature gradient, perspiration is transported from the inside to the outside, yet wind and rain cannot get in. This effect makes both fabric and leather clothing highly weatherproof, and also very comfortable to wear. The membranes are manufactured from different base materials, depending on the brand, and are made either as a loose "liner", as a laminate (bonded to the outer material), or as a coating on a carrier material. The first product of this kind, the "Gore-Tex" membrane made of Teflon, fulfils its function due to its very fine pores, which allow moisture from the skin to move outwards, but prevent the larger raindrops from moving inwards. Gore-Tex is indeed highly effective, but the patented material comes at a price. All the other membranes consist of polyurethane or polyester, and transport water vapour molecules outwards by means of chemical reactions. Different materials have been adapted to the various applications in the field of motorcycle clothing. All of these climate membranes are sensitive to mechanical damage: if a membrane is pierced, clearly it can no longer provide protection. Damage can also result from the use of inappropriate washing agents. Softeners, including those contained in detergents, damage the membrane irreparably!
Most traditional, high-quality outer material with cult status for motorcycle clothing and accessories. Unmistakable in its natural, high-quality look, the strong image, ideally suited to both figure-hugging and highly functional designs. The biker's "second skin" still has the edge over any textile material when it comes to safety and resistance to abrasion and tearing. The way the material stretches as the clothing is worn means that leather clothing adapts to the body contours ideally, thus also guaranteeing that protectors fit optimally. Leather clothing should therefore always be bought with a close fit. Impregnation, leather oil and surface coatings guarantee good weather protection and a degree of rainproofing, but unfortunately also limit the breathability. Relatively heavy, but enthusiasts value this as a "quality feature". Looked after properly, it is very durable. Because leather does not itself offer much thermal insulation, the other features of the garment, or the base layers of clothing, must provide some help here.
Product details
- upper material: suede/ textile mix
- Climate membrane: not exist
- Fastening: Triple hook-and-loop fastening
- Width adjustment: not exist
- Sole: Rubber touring sole
- Shaft height: approx. 13 cm
- Country of manufacture: China
- Certification: certified according to EN 13634:2017
- Lining: Textile lining (100% polyester )
Overview of product features
- Waterproof
- Breathable
- Padded ankle caps
- Gearshift reinforcement
- Reflective insert
To ensure that your objective and truthful report will be really beneficial to all readers, please observe the following rules.
- Please only rate products that you have personally used for their intended purpose.
- Please give reasons for your positive and negative criticisms. Only then will they benefit other customers and allow us to improve the product if necessary.
- Please donβt copy content that has already been published elsewhere. Itβs your personal experience which counts.
- Data protection: Please donβt include your own and other peopleβs addresses, telephone numbers or URLs or even the names of third parties (people as well as companies) in your review.
- In your product review, please donβt make comparisons with third party product ranges. Regardless of whether you judge these positively or negatively, you, or we as operators of this online shop, would be violating competition law.
Fair play: Please follow these rules so that we donβt have to shorten or delete your rating.
Your product rating has been saved. It will be displayed in a few minutes
Do you really want to cancel your entry?