Handlebar Grips Flames
Pair
Important notes
Handlebar Grips Flames Pair
Flames handlebar grips
Elegant, high-polish chrome CNC-milled aluminium grips with a flame motif. These top-quality grips are made from the aluminium alloy 6061-T6. They are of medium to high strength, have good mechanical properties and corrosion resistance. The integrated rubber inlays (material: EPDM) are highly resistant to weather, moisture and ozone. They also offer elasticity and thermal resilience, and thus ensure secure grip. On top of all this, they are a real eye-catching feature on your bike. Even when it's pouring with rain their rubberised surface helps to stop your fingers sliding off.
- The grip ends can be unscrewed to allow handlebar ends, bar-end turn signals and mirrors to be mounted..
- Overall length: approx. 140 mm
- Material: Aluminium
- Grip end: removable threaded end cap
- Outside diameter: approx. 39 mm
Grip circumference: approx. 126 mm
- Available for metric and imperial handlebars
Note:
These grips are suitable for universal fitting to a variety of handlebars. In rare cases there may be compatibility problems due to differing handlebar diameters, depending on the particular manufacturer. It may also be necessary to customise the original throttle grip sleeve. On some models a small amount of metal has to be filed away. The grips should fit tightly, but should push on without too much effort. It is very important to check the fit before installing the grips. Never force them on!
Warning: Choking hazard and risk of internal injuries! Small parts can be swallowed. Keep out of reach of children under 3 years of age. Manufacturer: Detlev Louis Motorrad-Vertriebsgesellschaft mbH | Rungedamm 35 | 21035 Hamburg | Germany | Tel. 00 49 (0) 40 β 734 193 60 | service@louis.de | www.louis.de
It all began with a small motorcycle workshop in Hamburg. Since then, Louis has become Europe's largest motorcycle and leisure retailer. And even now, after more than three quarters of a century, we at Louis are no less passionate about life on two wheels.
This grip has a removable end cap to allow bar-end turn signals or mirrors to be mounted!
This product is made of high-quality CNC-machined aluminium and will look great on your motorbike.
To ensure that it gives you many years of service, please observe the following care instructions:
1. After installing the product, and each time you wash your motorbike, apply a wax-based care product, e.g. Procycle Polishing Wax, Order no. 10004923 for protection against wind and weather. You may need to repeat the application after an outing in winter weather, rain or salty air (near the coast).
2. Remove any corrosion as soon as possible using a standard aluminium polish (e.g. Autosol Aluminium Polish, Order no. 10004421).
To ensure that your objective and truthful report will be really beneficial to all readers, please observe the following rules.
- Please only rate products that you have personally used for their intended purpose.
- Please give reasons for your positive and negative criticisms. Only then will they benefit other customers and allow us to improve the product if necessary.
- Please donβt copy content that has already been published elsewhere. Itβs your personal experience which counts.
- Data protection: Please donβt include your own and other peopleβs addresses, telephone numbers or URLs or even the names of third parties (people as well as companies) in your review.
- In your product review, please donβt make comparisons with third party product ranges. Regardless of whether you judge these positively or negatively, you, or we as operators of this online shop, would be violating competition law.
Fair play: Please follow these rules so that we donβt have to shorten or delete your rating.
Your product rating has been saved. It will be displayed in a few minutes
Do you really want to cancel your entry?